The cheapest way to send marketing email is your own Amazon SES account. Amazon charges $0.10 per 1,000 emails sent, à la carte, with no monthly fee and no minimum (AWS SES pricing). A 25,000-contact list mailed four times a month is 100,000 emails, ten dollars. Few roundups of cheap email tools say so, because SES isn’t a product you can put in a listicle. It’s an API, not a signup page.
That’s the honest answer, and it’s incomplete if it stops there. $0.10 per 1,000 buys sending and nothing else: no contact list, no campaign editor, no unsubscribe page, no bounce handling. Add those back at real prices and running your own SES account still beats every paid hosted subscription at the list sizes below. It isn’t the right call for everyone, and a free plan beats it on small lists.
Key Takeaways
- SES à la carte sending is $0.10 per 1,000 emails, with no monthly fee (AWS SES pricing). New accounts default to a pricier plan at $0.16 per 1,000, so the $0.10 rate takes one deliberate switch.
- Add a paid front end for the contact list, editor and unsubscribe page SES doesn’t include, and the full route is still cheaper than any paid hosted subscription checked, by $19.50 a month at 5,000 contacts, widening to $185 at 100,000.
- Kit’s free plan covers up to 10,000 contacts, and several other free plans cover smaller lists. Where a free plan fits, running your own SES account saves nothing, because the alternative already costs zero.
- SES hands you bounce and complaint monitoring, a production-access request, and an AWS bill to own. That’s real work, and it’s the reason this isn’t the right answer for everyone who asked the question.
Costs at three list sizes
Amazon’s rates were checked October 29, 2026 and the other vendors’ prices September 4, 2026. Each row assumes four sends a month, a middling cadence for a marketing list; multiply your own contacts by your own send frequency and the SES line moves proportionally.
| Subscribers | Emails/month | SES sending alone | Front end (EmailFig BYOS) | Full self-run total | Cheapest paid hosted subscription |
|---|---|---|---|---|---|
| 5,000 | 20,000 | $2.00 | $10.00 | $12.00 | $31.50 (EmailOctopus) |
| 25,000 | 100,000 | $10.00 | $34.00 | $44.00 | $82.00 (Brevo) |
| 100,000 | 400,000 | $40.00 | $120.00 | $160.00 | $345.00 (EmailOctopus) |
“SES sending alone” is the à la carte rate against the email volume in that row. “Front end” is what a paid tool that supplies the contact list, campaign builder and unsubscribe page charges on top, using EmailFig’s own BYOS prices as one concrete example; BigMailer and MailBluster are two more, priced differently, and six tools that put a front end on SES covers the rest of that field. The gap against the cheapest paid hosted subscription grows with list size: it’s $19.50 a month at 5,000 contacts and $185 at 100,000. Against EmailFig’s own managed plan the saving is smaller, $3 a month at 5,000 contacts (when BYOS is the wrong choice has the numbers). The table leaves out free plans, which change the answer on small lists. The full comparison at 25,000 subscribers and at 100,000 show the same shape against every other vendor priced there.
One catch sits inside the $0.10 figure itself. AWS accounts opened since July 21, 2026, or idle since mid-2025, default to a plan called Essentials at $0.16 per 1,000, 60% more, and moving to à la carte is a deliberate switch. What Amazon SES actually costs walks through both plans line by line. Even at $0.16, SES sending alone at 100,000 emails is $16, and the full self-run total at 25,000 contacts is still $50.
What the SES rate doesn’t include
$0.10 per 1,000 pays for one thing: Amazon attempting delivery of a message you already built. Everything else a marketing send needs is a separate cost, whether you pay a tool for it or build it yourself.
- A place to store contacts, build a campaign and render a template. SES has no dashboard for any of that.
- An unsubscribe page and a suppression list that’s actually checked. Amazon expects you to maintain both.
- Bounce and complaint monitoring against Amazon’s own thresholds. Bounces, complaints and suppression in SES covers the mechanics. Ignore them and Amazon can pause your whole account’s ability to send, not just your next campaign.
- A production-access request before you can mail anyone who hasn’t verified their own address with you. Getting out of the SES sandbox is a request AWS reviews, not a checkout page. AWS says it typically responds within 96 hours and can take longer if it needs more information.
- An AWS account you’re willing to own the bill for, including the add-ons that meter separately from sending, like a dedicated IP most senders don’t need. Who actually needs a dedicated IP on SES is worth reading before you turn one on.
None of that shows up in the $0.10 rate, and none of it is optional. It’s the work a hosted subscription’s higher price is already quietly doing for you.
Who shouldn’t run their own SES account
Running your own SES account is a good trade for someone who’s already comfortable owning infrastructure and wants the lowest possible bill for it. It’s a bad trade for a few specific people, regardless of the savings above.
Anyone who wants to be sending this afternoon, not next week. Production access is a review, not an instant approval, and a new account starts in a sandbox that can only send to addresses you’ve verified until AWS clears it.
Anyone unwilling to open an AWS console and stay in it. Bounce and complaint rates are tracked against your account, not a vendor’s, and nobody’s watching them but you. When bringing your own SES is the wrong choice works through exactly where that overhead stops paying for itself.
An agency running several clients’ reputations at once. Isolating each client’s sending domain and complaint history matters more at that point than shaving a few dollars off any one account, and keeping each client’s reputation separate is a harder problem than pricing.
Anyone whose real problem is a feature, not a price. Advanced automation, deep integrations and support: a $10 subscription and a $0.10-per-1,000 AWS bill both leave those out. If that’s the gap, price isn’t the comparison that matters.
When free plans beat SES
The table compares paid plans. Against free plans the comparison changes shape, because several hosted vendors cost nothing at the sizes where running SES would otherwise win.
Kit’s free plan holds 10,000 contacts with no send limit, though it includes no automations. EmailOctopus and beehiiv are free to 2,500, and Brevo stores far more but throttles to 300 emails a day. Against a free plan, the SES route saves nothing, while still costing the AWS account, the production-access request and the ongoing bounce monitoring above. Free tiers compared breaks down which cap, contacts or sends, each of those free plans actually enforces, since a list mailed daily can outgrow one faster than its contact count suggests.
That’s the honest floor. Your own SES account is the cheapest way to send marketing email once your list is past what a free hosted plan covers, which is 10,000 contacts on Kit’s and less on the others.
Frequently asked questions
What is the cheapest way to send marketing email?
Running your own Amazon SES account, at $0.10 per 1,000 emails à la carte with no monthly fee (AWS SES pricing). Add a paid front end for the contact list, editor and unsubscribe page SES doesn’t include, and the full route still undercuts every paid hosted subscription checked at 5,000 subscribers and up. Free plans can beat it on small lists.
Is Amazon SES really $0.10 per 1,000 emails?
Yes, on the à la carte plan. Accounts opened since July 21, 2026 default to a different plan called Essentials, priced at $0.16 per 1,000. Moving to à la carte is a deliberate switch (AWS SES pricing). What Amazon SES actually costs covers both plans and the add-ons that meter separately.
What does Amazon SES not include?
A contact list, a campaign editor, an unsubscribe page, and bounce or complaint handling. SES is an API that attempts delivery of a message you already built; everything else a marketing send needs comes from a tool built on top of it or from code you write yourself. Six tools that put a front end on SES covers the tool side of that gap.
Is running my own Amazon SES account cheaper than Mailchimp or Brevo?
Yes, once you add a front end to SES’s bare sending rate. At 25,000 subscribers mailed four times a month, the full self-run route is $44, against Brevo’s $82, the cheapest paid hosted subscription checked at that size. Mailchimp’s Essentials plan is $270 at that size. The gap widens as the list grows.
At what list size does running my own Amazon SES account stop being worth it?
Below roughly 2,500 to 10,000 contacts, depending on the vendor. Kit, EmailOctopus and Brevo all offer free plans that cover lists in that range (Brevo caps sends at 300 a day), so running SES yourself saves nothing against the free alternative while still costing the AWS account overhead. Cheap email marketing under 2,500 subscribers covers which free tier fits which send pattern.
How to choose
If you already have an AWS account, or you’re comfortable opening one, running your own SES account is the cheapest route to sending marketing email once your list clears a free hosted plan’s ceiling. Amazon SES for email marketing: the complete guide is the full setup, start to finish.
EmailFig connects to your own AWS account on its BYOS plan family, so Amazon bills you directly at the rates above, and it also sells managed sending for anyone who’d rather never open the AWS console at all. Both are free to 4,000 subscribers, no card, and the full pricing at every list size is on one page.